RUB-R-WALL® AIRTIGHT AIR/VAPOR BARRIER - PRODUCT SPECIFICATIONS
COMPOSITION: Hydrocarbon polymers in hydrocarbon solvents, applied membrane
COLOR: Yellow
DENSITY: 6.8-7.8 lbs. / gallon
MINIMUM TEMP FOR APPLICATION: 15ºF
APPLICATION: Airless spray
COMPOSITION: Hydrocarbon polymers in hydrocarbon solvents, applied membrane
COLOR: Yellow
DENSITY: 6.8-7.8 lbs. / gallon
MINIMUM TEMP FOR APPLICATION: 15ºF
APPLICATION: Airless spray
PROPERTY | TEST METHODS | TEST RESULTS |
Air Leakage Rate | ASTM E283 | 0.0004 cfm/ft2 on block/drywall |
Elongation | ASTM D412 (die C) | 1800+% |
Low-Temp Flexibility | Bend around 0.5” mandrel | Flexible to -20ºF |
Abrasion Resistance | 700 psi on .06”X.06” point moving 1” per second | Less than .10% membrane loss |
Asphalt Content | N/A | 0.0% |
Peel Adhesion | ASTM D-903 (block) |
7.65 lbs./inch 12 lbs./inch |
Crack Bridging | ASTM C836 | Exceeds 10 cycles to 1/8" at 15ºF |
Water Vapor Permenance | ASTM E96 (water method) | .08 perms per dry 40-mil coating grams/ft2/hr Hg |
Liquid Water Absorption | ASTM D95 | Less than 0.5% weight |
Resistance to Bacteria | ASTM D4299-83 (modified) | No attack |
Resistance to Gust Wind Load | ASTM E330 | Resists a suction pressure of 62.8 lbs/ft2 for 10 seconds with no de-lamination and no increase in air leakage rate when test at 1.6 lbs/ft2 |
Resistance to Sustained Wind Load | ASTM E283 | Resists a suction pressure Wind Load of 20.9 lbs/ft2 maintained for 1 hour with no de-Lamination and no increase in air leakage rate when tested at 1.6 lbs/ft2 |
Resistance to Chemical Attack | Visual | Unaffected by chemicals in Concentrations typically found in soils |
Solvent Resistance | Visual | Exceeds performance of Modified asphalts |
Life Expectancy | ASTM D412 | Exceeds 100 years |